We hope you find the site helpful.Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site.

I want to send it multiple bytes of data. Search.

Adding A Library To A NetBeans Project. They have working sample code here O.K I finally got it working thanks for the great libraries.
It's a C library, but third parties have added wrappers for Python and other high-level languages. Assigning the first 2 values will only set the bottom bytes in eahc 32-bit entity. Is there any libraries like this?

The same problem happens with i2cget. I’m wondering what the best way to do this is – should I do an initial register read/write and then a series of registerless generic read/writes to get or set the remaining bytes of the i2c slave response or command, or should I add some more methods to the library i2c class? I have always the same results. With wiringPi v2, you can even use the gpio command to run the i2cdtect program with the right parameters too: gpio i2cdSo the physical pins are always the same, the underlying BCM_GPIO pins change between board revs, but wiringPi sorts it out for you. I ran the same exact code, but to my surprise, all is on the same state. Suitable platforms for using this library include Raspberry Pi. Also its not very detrimental to what i'm doing but is it possible to easely display images in the same manner without startxI think you are meant to use the cairo library within GTK to do that sort of graphics work. Raspberry Pi Projects . It runs exactly the same on Pi and Windows/OS X/x86linux so you could develop your UI stuff on any machine.Making Smalltalk on ARM since 1986; making your Scratch better since 2012 I have heard it has some problems because of the repeat start command.

I program in C.I’m using your I2C helpers with an MCP23017 16-bit port expander, using your example program as a starting point, and it’s all working nicely. if((temp1= wiringPiI2CReadReg8 (e,TCN_ADRESS_R))<0)You need to call wiringPiI2CSetup() with the device ID, not zero. Now I added a PCF8563 and also have a problem with writing/reading, do you have an code example of using the I2C library to see the mechanism of action ? (Which AUIU doesn’t cater for this condition correctly)Not sure about an I2C library for an ultrasonic sensor but I have some nice code for the HCSR04’s – will publish it soon.I am always getting a return of -1 whenever I read or write from any register on the MMA8452Q. gpioNumber: The pin number to check.


But when I call my program using wiringpi, I get always the last result that adafruit outputs.

So now I am confused. The 2017 Hackaday Prize; Design your concept; This project was created on 11/01/2016 and last updated 3 years ago. It might pick that up.I’ve installed the wiringpi libraries but something is wrong. it knows what board Rev and select the appropriate one.If you want to change the device, you’ll need to write your own – but they’re really only simple wrappers round what the kernel provides, so it’s not a big job.I have implemented the i2c library in my code and tested it (it works).to sum it up, is it possible to send all that data in one write? With those libraries the results are ok, and not constant. When a gyro is left on a flat surface with nothing interacting with it at all the outputs from it should all be “0” correct? Use perror().It seems like if the kernel is reading it then you can’t – and that’s fair.

Would that be possible to do with the I2C library, and how would you propose for me to do?just use the read() system call with the file descriptor returned from the setup.Thanks for the excellent library – I’m using it with a c# wrapper in Mono applications (tho that’s not really relevant to what I’m going to ask!) I looked over GTK and, unless i'm stupid and missed a giant part of the library, I don't think I would easy be able to do this.